ES EN
Modelo ResueltoWorked Solution

Solución — Prototipo Digital y DOESolution — Digital Prototype & DOE

Quiz resuelto y ejemplo digital completoSolved quiz and full digital example

Respuestas correctas (6/6)Correct answers (6/6)

1. Número de cavidades → Factor.Number of cavities → Factor.
2. 2 cavidades / 4 cavidades → Niveles.2 cavities / 4 cavities → Levels.
3. Área neta como % del área total → Variable de respuesta.Net area as % of total area → Response variable.
4. Un factor a la vez, sin combinar → OFAT.One factor at a time, no combining → OFAT.
5. Todas las combinaciones → Factorial Completo.All combinations → Full Factorial.
6. Valores calculados de un modelo digital → estimaciones comparativas, no pruebas físicas.Values calculated from a digital model → comparative estimates, not physical tests.

Ejemplo completo con un tabique ficticio ("Tabique Z")Full example with a fictional brick ("Brick Z")

Caso inventado, solo para ver el método; no es EcoBricks y sus números no sirven para su reto. Sección transversal exterior de 24 × 12 unidades (área total = 288). Cada cavidad mide 4 × 6 (área 24).Made-up case, only to see the method; it is not EcoBricks and its numbers do not apply to your challenge. Outer cross-section of 24 × 12 units (total area = 288). Each cavity measures 4 × 6 (area 24).

Factor A: número de cavidades (2 / 4). Factor B: perfil del borde (recto / machihembrado). Costo de construcción: mortero para unir; cantidad base con el borde recto = 24 unidades de longitud de unión por pieza; con el borde machihembrado = 16.Factor A: number of cavities (2 / 4). Factor B: edge profile (straight / tongue-and-groove). Construction cost: mortar to join; base amount with the straight edge = 24 units of joint length per piece; with the tongue-and-groove edge = 16.

VarianteVariantABCálculo de área netaNet area calculationCapacidad relativaRelative capacityAhorro de morteroMortar savings
V12RectoStraight288 − 2×24 = 240240 ÷ 288 = 83.3 %(24 − 24) ÷ 24 = 0 %
V24RectoStraight288 − 4×24 = 192192 ÷ 288 = 66.7 %(24 − 24) ÷ 24 = 0 %
V32MachihembradoTongue-and-groove288 − 2×24 = 240240 ÷ 288 = 83.3 %(24 − 16) ÷ 24 = 33.3 %
V44MachihembradoTongue-and-groove288 − 4×24 = 192192 ÷ 288 = 66.7 %(24 − 16) ÷ 24 = 33.3 %

Efectos:Effects: capacidad relativa: pasar de 2 a 4 cavidades cambia −16.7 puntos y el borde no la cambia. Ahorro de mortero: el borde machihembrado aporta +33.3 % y las cavidades no lo cambian. Interacción: 0 en ambas respuestas.relative capacity: going from 2 to 4 cavities changes it by −16.7 points and the edge does not change it. Mortar savings: the tongue-and-groove edge contributes +33.3% and the cavities do not change it. Interaction: 0 in both responses.

Interpretación:Interpretation: cada respuesta depende sobre todo de un factor, y eso también es un hallazgo: se pueden mover por separado.each response depends mainly on one factor, and that is also a finding: they can be moved separately.

Decisión:Decision: el equipo propone 2 cavidades + borde machihembrado (V3): conserva la capacidad relativa más alta (83.3 %) y logra el ahorro de mortero (33.3 %). Cuatro cavidades solo restan capacidad sin ahorrar nada en la unión.the team proposes 2 cavities + tongue-and-groove edge (V3): it keeps the highest relative capacity (83.3%) and achieves the mortar savings (33.3%). Four cavities only subtract capacity without saving anything in the joint.

Límite:Limit: el área neta es un indicador comparativo; no considera concentración de esfuerzos, pandeo ni el material real. Una prueba física podría cambiar el orden de las variantes.net area is a comparative indicator; it does not consider stress concentration, buckling, or the real material. A physical test could change the order of the variants.

Cómo debe verse la evidencia digitalWhat the digital evidence should look like

Por cada variante: al menos 2 capturas con vistas distintas, con el código en el nombre (V3_frente.png, V3_lateral.png), y las operaciones del cálculo escritas. Además: una vista acotada con las medidas visibles y el enlace o archivo del modelo. Todas las variantes se parten del mismo modelo base y solo cambian los niveles de los factores.For each variant: at least 2 screenshots with different views, with the code in the file name (V3_front.png, V3_side.png), and the calculation operations written out. Also: one dimensioned view with visible measurements and the model's link or file. All variants start from the same base model and only the factor levels change.

Antes de continuar: vuelvan al taller y completen las 5 etapas con los factores y niveles reales de su propio reto. Si eligen OFAT porque tienen poco tiempo, está bien: documenten por qué y qué se están perdiendo al no probar todas las combinaciones. Y no inventen precios ni datos: cítenlos. Before continuing: go back to the workshop and complete all 5 stages with your own challenge's real factors and levels. If you choose OFAT because time is short, that's fine: document why and what you're missing by not testing every combination. And do not invent prices or data: cite them.